Issue 20, 2015

Biomagnetic separation and pre-concentration of trace amounts of Hg2+ in biological samples based on T-rich oligonucleotide modified magnetic beads

Abstract

We report a simple and sensitive method for the analysis of trace mercury(II) (Hg2+) in biological samples, based on a magnetic bead (MB) separation/pre-concentration process and thymine-Hg2+-thymine (T-Hg2+-T) coordination chemistry. For this purpose, mercury specific aptamers are conjugated on magnetic beads, increasing the local concentration and serve as affinity probes to capture and separate trace amounts of the target. Then flow injection cold vapor atomic absorption spectrometry (FI CV AAS) is used for the determination of mercury. The analysis conditions are optimized and the performances of the proposed method are investigated. The limit of detection (LOD) obtained under the optimal conditions is 0.05 μg L−1 and the relative standard deviation (RSD) for the determination of 0.5 and 10.0 μg L−1 of Hg2+ is 3.78 and 2.93% (n = 5), respectively. The calibration curve for Hg2+ is linear from 0.12–87.5 μg L−1 with a coefficient of determination (R2) of 0.998, and the enrichment factor is about 280, which make it suitable for dilute solution analysis. The presented procedure is successfully applied for the determination of trace contents of Hg2+ in biological samples, and the accuracy is evaluated analyzing quality control materials (Seronorm™ Blood LOT NO 201505 and Urine LOT NO 2525).

Graphical abstract: Biomagnetic separation and pre-concentration of trace amounts of Hg2+ in biological samples based on T-rich oligonucleotide modified magnetic beads

Article information

Article type
Paper
Submitted
14 Jul 2015
Accepted
12 Sep 2015
First published
15 Sep 2015

Anal. Methods, 2015,7, 8947-8953

Biomagnetic separation and pre-concentration of trace amounts of Hg2+ in biological samples based on T-rich oligonucleotide modified magnetic beads

L. Farzin, M. Shamsipur and M. A. Tabrizi, Anal. Methods, 2015, 7, 8947 DOI: 10.1039/C5AY01827G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements