Issue 3, 2015

Improved three-way catalytic activity of bimetallic Ir–Rh catalysts supported on CeO2–ZrO2

Abstract

The addition of a small amount of Ir caused a significant increase in not only CO and C3H6 oxidation activity but also NO reduction activity of Rh/CeO2–ZrO2 with a Ce/Zr molar ratio of 1/4 for NO–CO–C3H6–H2–O2 reaction under stoichiometric conditions. The optimum Ir/Rh atomic ratio was 1/9. The Ir additive was found to suppress the preferential oxidation of CO and C3H6 by O2, leading to an improvement in the efficiency of CO and C3H6 utilization for NO reduction. Catalyst characterization such as H2-TPR and X-ray absorption spectroscopy (XANES and EXAFS) revealed that the Rh species in the Ir–Rh/CeO2–ZrO2 samples is mainly present as Rh2O3 nanoparticles and that the addition of a small amount of Ir (Ir/Rh = 1/9) can improve the reducibility of Rh2O3 nanoparticles. On the basis of surface analysis by XPS and FT-IR spectroscopy following CO adsorption and STEM observation, the formation of Ir–Rh nanoparticles composed of finely-divided Ir species on the surface of Rh particles with a size of 1 nm was considered to be responsible for the high catalytic activity of Ir–Rh/CeO2–ZrO2 for NO–CO–C3H6–H2–O2 reaction. Ir–Rh/CeO2–ZrO2 with Ir–Rh loading of 0.3 wt% still showed high catalytic performance, which is comparable with that of 0.5 wt% Rh/CeO2–ZrO2, minimizing Rh usage.

Graphical abstract: Improved three-way catalytic activity of bimetallic Ir–Rh catalysts supported on CeO2–ZrO2

Supplementary files

Article information

Article type
Paper
Submitted
17 Nov 2014
Accepted
18 Dec 2014
First published
07 Jan 2015

Catal. Sci. Technol., 2015,5, 1792-1800

Author version available

Improved three-way catalytic activity of bimetallic Ir–Rh catalysts supported on CeO2–ZrO2

M. Haneda, T. Kaneko, N. Kamiuchi and M. Ozawa, Catal. Sci. Technol., 2015, 5, 1792 DOI: 10.1039/C4CY01502A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements