Issue 19, 2015

Synthesis, crystal structure, and transport properties of Cu2.2Zn0.8SnSe4−xTex (0.1 ≤ x ≤ 0.4)

Abstract

Quaternary chalcogenides, particular compounds with the stannite structure-type, are of interest for thermoelectrics applications however tellurium-containing compositions have not been extensively investigated. We report on the synthesis and high temperature thermoelectric properties of p-type stannites Cu2.2Zn0.8SnSe4−xTex (x = 0.1, 0.2, 0.3, and 0.4). The compositions for each specimen were confirmed with a combination of Rietveld refinement and elemental analysis. Hall measurements indicate that holes are the dominant charge carriers in these materials. The electrical resistivity shows little temperature dependence up to 500 K and then increases with increasing temperature. The thermal conductivity decreases with increasing temperature with no indication of increase at higher temperatures suggesting a minimal bipolar diffusion effect in the thermal conductivity although these materials possess relatively small band-gaps as compared to that of other stannite compositions. A maximum ZT value of 0.56 was obtained at 700 K for Cu2.2Zn0.8SnSe3.7Te0.3 due to a relatively high Seebeck coefficient and low thermal conductivity.

Graphical abstract: Synthesis, crystal structure, and transport properties of Cu2.2Zn0.8SnSe4−xTex (0.1 ≤ x ≤ 0.4)

Supplementary files

Article information

Article type
Paper
Submitted
05 Mar 2015
Accepted
13 Apr 2015
First published
13 Apr 2015

Dalton Trans., 2015,44, 9014-9019

Author version available

Synthesis, crystal structure, and transport properties of Cu2.2Zn0.8SnSe4−xTex (0.1 ≤ x ≤ 0.4)

Y. Dong, B. Eckert, H. Wang, X. Zeng, T. M. Tritt and G. S. Nolas, Dalton Trans., 2015, 44, 9014 DOI: 10.1039/C5DT00910C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements