Issue 8, 2015

Efficient and selective hydrogenation of biomass-derived furfural to cyclopentanone using Ru catalysts

Abstract

The selective hydrogenation of furfural into cyclopentanone is an attractive transformation to advance in the sustainable synthesis of important chemicals from biomass. A supported Ru nanoparticle catalyst on an acidic MOF material (Ru/MIL-101) was designed for the highly active and selective conversion of furfural to cyclopentanone in aqueous media. Complete conversion of furfural with a selectivity higher than 96% was achieved within 2.5 h at 160 °C and 4.0 MPa H2 pressure.

Graphical abstract: Efficient and selective hydrogenation of biomass-derived furfural to cyclopentanone using Ru catalysts

Supplementary files

Article information

Article type
Communication
Submitted
29 Jun 2015
Accepted
09 Jul 2015
First published
09 Jul 2015

Green Chem., 2015,17, 4183-4188

Author version available

Efficient and selective hydrogenation of biomass-derived furfural to cyclopentanone using Ru catalysts

R. Fang, H. Liu, R. Luque and Y. Li, Green Chem., 2015, 17, 4183 DOI: 10.1039/C5GC01462J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements