Issue 16, 2015

Enhanced in-plane thermoelectric figure of merit in p-type SiGe thin films by nanograin boundaries

Abstract

P-Type polycrystalline silicon–germanium (SiGe) thin films are grown by low-pressure chemical vapor deposition (LPCVD) and their thermoelectric properties are characterized from 120 K to 300 K for potential application in integrated microscale cooling. The naturally formed grain boundaries are found to play a crucial role in determining both the charge and thermal transport properties of the films. Particularly, the grain boundaries create energy barriers for charge transport which lead to different dependences of charge mobility on doping concentration and temperature from the bulk counterparts. Meanwhile, the unique columnar grain structures result in remarkable thermal conductivity anisotropy with the in-plane thermal conductivities of SiGe films about 50% lower than the cross-plane values. By optimizing the growth conditions and doping level, a high in-plane figure of merit (ZT) of 0.2 for SiGe films is achieved at 300 K, which is about 100% higher than the previous record for p-type SiGe alloys, mainly due to the significant reduction in the in-plane thermal conductivity caused by nanograin boundaries. The low cost and excellent scalability of LPCVD render these high-performance SiGe films ideal candidates for thin-film thermoelectric applications.

Graphical abstract: Enhanced in-plane thermoelectric figure of merit in p-type SiGe thin films by nanograin boundaries

Supplementary files

Article information

Article type
Paper
Submitted
09 Jan 2015
Accepted
18 Mar 2015
First published
20 Mar 2015

Nanoscale, 2015,7, 7331-7339

Enhanced in-plane thermoelectric figure of merit in p-type SiGe thin films by nanograin boundaries

J. Lu, R. Guo, W. Dai and B. Huang, Nanoscale, 2015, 7, 7331 DOI: 10.1039/C5NR00181A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements