Issue 24, 2015

Continuous l-lactic acid production from defatted rice bran hydrolysate using corn stover bagasse immobilized carrier

Abstract

In this paper, L-lactic acid (LLA) was produced using defatted rice bran hydrolysate. Agricultural waste corn stover bagasse (CSB), under the conditions of good mechanical and chemical stabilities, was used as the immobilized carrier. As a result, a maximal concentration of 88 g L−1 of LLA with an average yield of 0.95 g g−1 and productivity of 5.20 g L−1 h−1 were achieved in a single-stage immobilized repeated-batch fermentation. In addition, when single-stage immobilized continuous fermentation was carried out, a maximal LLA concentration of 84 g L−1 was obtained with an average yield and productivity of 0.97 g g−1 and 5.73 g L−1 h−1, respectively. To balance the increases in the productivity, concentration and yield of LLA, two-stage immobilized continuous fermentation was performed. LLA productivities of 6.20 g L−1 h−1 in the first stage and 2.18 g L−1 h−1 in the second stage were achieved. The whole immobilized fermentation process has potential in L-lactic acid biorefineries and industrialization.

Graphical abstract: Continuous l-lactic acid production from defatted rice bran hydrolysate using corn stover bagasse immobilized carrier

Article information

Article type
Paper
Submitted
17 May 2014
Accepted
28 Jan 2015
First published
28 Jan 2015

RSC Adv., 2015,5, 18511-18517

Author version available

Continuous L-lactic acid production from defatted rice bran hydrolysate using corn stover bagasse immobilized carrier

L. Li, D. Cai, C. Wang, J. Han, W. Ren, J. Zheng, Z. Wang and T. Tan, RSC Adv., 2015, 5, 18511 DOI: 10.1039/C4RA04641B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements