Issue 11, 2015

Low-temperature preparation of macroscopic nitrogen-doped graphene hydrogel for high-performance ultrafast supercapacitors

Abstract

In this work, a simple method by using ammonia at a relatively low temperature (90 °C) to prepare nitrogen-doped graphene hydrogel (N-GH) is demonstrated. Ammonia is not only a nitrogen source but also a modification to the 3D structure of graphene hydrogel. The structure and morphology characterization of the materials was characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and Raman spectroscopy. The resulting N-GH has a high atomic percentage of N up to 13.44%. It has been found that the supercapacitor performance of the resulting N-GH could be significantly improved. At the constant current density of 1 A g−1, the specific capacitance was estimated as 217.8 F g−1. Even at the constant current density of 200 A g−1, the electrode still has a specific capacitance of 189.8 F g−1. The material also has a retention rate of 95.8% of its initial capacitance after 1000 cycles at a current density of 20 A g−1. Moreover, the N-GH has excellent electrochemical stability and a good performance for the rate property even at an ultrafast charge/discharge rate; thus, they may have potential applications as ultrafast supercapacitors.

Graphical abstract: Low-temperature preparation of macroscopic nitrogen-doped graphene hydrogel for high-performance ultrafast supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
30 Aug 2014
Accepted
04 Dec 2014
First published
05 Dec 2014

RSC Adv., 2015,5, 8044-8049

Low-temperature preparation of macroscopic nitrogen-doped graphene hydrogel for high-performance ultrafast supercapacitors

H. Xin, D. He, Y. Wang, W. Zhao and X. Du, RSC Adv., 2015, 5, 8044 DOI: 10.1039/C4RA09497B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements