Issue 5, 2015

Diindeno[1,2-g:1′,2′-s]rubicene: all-carbon non-fullerene electron acceptor for efficient bulk-heterojunction organic solar cells with high open-circuit voltage

Abstract

An all carbon non-fullerene electron acceptor material based on diindeno[1,2-g:1′,2′-s]rubicene (DIR) was readily synthesized and processed for bulk-heterojunction organic solar cells. High PCE up to 3.05% with a relatively high VOC of 1.22 V has been achieved with P3HT electron donor material by the variation of donor–acceptor blending ratio.

Graphical abstract: Diindeno[1,2-g:1′,2′-s]rubicene: all-carbon non-fullerene electron acceptor for efficient bulk-heterojunction organic solar cells with high open-circuit voltage

Supplementary files

Article information

Article type
Communication
Submitted
16 Oct 2014
Accepted
02 Dec 2014
First published
04 Dec 2014

RSC Adv., 2015,5, 3381-3385

Author version available

Diindeno[1,2-g:1′,2′-s]rubicene: all-carbon non-fullerene electron acceptor for efficient bulk-heterojunction organic solar cells with high open-circuit voltage

H. Chen, J. Golder, S. Yeh, C. Lin, C. Chen and C. Chen, RSC Adv., 2015, 5, 3381 DOI: 10.1039/C4RA12505C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements