Issue 22, 2015

Synthesizing graphenes directly on SiO2/Si in open environments by a dual flame method

Abstract

In this work, a simple, productive and low cost method is reported for synthesizing few-layer graphenes directly on SiO2/Si substrates. Films of nickel with different thicknesses (25–700 nm) are thermally deposited on SiO2/Si substrates as catalyst. The substrates with nickel films are treated by lighting cotton and alcohol blast burners in sequence and then cooling down quickly. The dual flames last only several minutes. After growth, few-layer graphenes can be found on the upper surface of nickel and at the interfaces between the nickel and the SiO2/Si, which are confirmed by Raman spectroscopy. Few-layer graphenes can be directly obtained on the SiO2/Si substrate after etching off nickel, without further transfer process. Scanning Raman mapping and transmission electron microscopy indicate that the graphenes are uniform, continuous and of high quality. The dependence of the quality of graphenes on the thickness of nickel have been studied and discussed.

Graphical abstract: Synthesizing graphenes directly on SiO2/Si in open environments by a dual flame method

Article information

Article type
Paper
Submitted
30 Oct 2014
Accepted
27 Jan 2015
First published
27 Jan 2015

RSC Adv., 2015,5, 16691-16695

Author version available

Synthesizing graphenes directly on SiO2/Si in open environments by a dual flame method

W. Gang, Z. Yun, D. Ya, C. Minjiang, T. Li, F. Xiaokun, H. Wenbin, Y. Huaichao and S. Lianfeng, RSC Adv., 2015, 5, 16691 DOI: 10.1039/C4RA13438A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements