Issue 11, 2015

New junction materials by the direct growth of ZnO NWs on organic semiconductors

Abstract

Ordered hetero-junctions using one dimensional inorganic nanostructures have been widely studied to develop devices such as high efficiency photovoltaic devices, light emitting diodes, catalysts, supercapacitors, lithium ion batteries and nanogenerators. High quality Schottky contacts can be obtained by the spin coating of conducting polymer dispersions/solutions onto inorganic nanostructures; however, the interaction of polar surfaces of the nanostructures with chemically active materials in the spin coating solution makes the junctions less reliable. In the present work, we show that high quality junctions can be fabricated by either directly growing the nanostructures onto the vapour phase polymerised (VPP) poly(3,4-ethylenedioxythiophene) (PEDOT) substrates or sandwiching VPP polymerised substrates, thereby avoiding any unwanted interactions with the acidic additives from the polymer solution at the organic–inorganic interfaces. The IV measurements proved that the direct growth of ZnO NWs on PEDOT coated substrates creates an ohmic contact, whereas the PEDOT layer on top surface produces a Schottky contact due to the dipole moment with the polar ends.

Graphical abstract: New junction materials by the direct growth of ZnO NWs on organic semiconductors

Supplementary files

Article information

Article type
Communication
Submitted
04 Jun 2014
Accepted
09 Dec 2014
First published
10 Dec 2014

RSC Adv., 2015,5, 7932-7937

Author version available

New junction materials by the direct growth of ZnO NWs on organic semiconductors

S. S. Nair, B. Kolodziejczyk, K. West, T. S. Hansen, S. B. Adeloju, J. S. Forsythe and B. Winther-Jensen, RSC Adv., 2015, 5, 7932 DOI: 10.1039/C4RA15621H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements