Issue 35, 2015

Studies on the electrochemical intercalation/de-intercalation mechanism of NiMn2O4 for high stable pseudocapacitor electrodes

Abstract

Sub-micron sized polyhedral shaped NiMn2O4 particles were successfully prepared by a glycine assisted solution combustion method. The phase purity and the presence of functional groups in NiMn2O4 were revealed through X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR), respectively. The formation of polyhedral shaped particles was inferred by field emission scanning electron microscopy (FE-SEM). The negative temperature coefficient of resistance (NTCR) behaviour of NiMn2O4 was observed using a solid state impedance analyser in the measured temperature range between 30 and 180 °C. Further, electrochemical studies revealed that NiMn2O4 stores the charge through intercalation rather than by a capacitive mechanism. The electrode stores 91% of the specific capacitance by intercalation and 9% by a capacitive mechanism. Also, NiMn2O4 possesses a specific capacitance of 202 F g−1 at 0.5 mA cm−2 in 1 M Na2SO4 electrolyte and exhibits excellent cyclic stability over 15 000 cycles. Similarly, the fabricated asymmetric device (FeVO4‖NiMn2O4) also delivers good specific capacitance (50 F g−1 at 1 mV s−1) and cyclic stability.

Graphical abstract: Studies on the electrochemical intercalation/de-intercalation mechanism of NiMn2O4 for high stable pseudocapacitor electrodes

Supplementary files

Article information

Article type
Paper
Submitted
08 Jan 2015
Accepted
03 Mar 2015
First published
18 Mar 2015

RSC Adv., 2015,5, 27649-27656

Studies on the electrochemical intercalation/de-intercalation mechanism of NiMn2O4 for high stable pseudocapacitor electrodes

K. Vijaya Sankar, S. Surendran, K. Pandi, A. M. Allin, V. D. Nithya, Y. S. Lee and R. Kalai Selvan, RSC Adv., 2015, 5, 27649 DOI: 10.1039/C5RA00407A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements