Issue 42, 2015

Photonic design of embedded dielectric scatterers for dye sensitized solar cells

Abstract

Embedded dielectric scatterers comprise an important approach for light trapping in dye-sensitized solar cells (DSCs) due to their simple fabrication process. The challenge in applying these scatterers lies in finding the optimal dimensions and concentration of the scatterers. This requires many experiments and it is often quite difficult to have a starting point for optimizing the concentration. Based on theories of light propagation in random media, we propose a simple model for DSCs with embedded silica spherical particles. Then, by full-wave optical calculations, we determine a narrow range for the concentration of silica particles that leads to the largest optical absorption in the cell. The simulation results were verified by realizing DSCs with different concentrations of silica particles. A power conversion efficiency of 8.08% in an 11 μm-thick N719-sensitized DSC was achieved with 6 vol% embedded silica, which further increased to 9.30% by applying a white scattering layer on the rear-side of the counter electrode. The design approach, presented here, is a general approach that can be applied for other types of solar light harvesting structures with low optical absorption coefficient.

Graphical abstract: Photonic design of embedded dielectric scatterers for dye sensitized solar cells

Supplementary files

Article information

Article type
Paper
Submitted
06 Mar 2015
Accepted
31 Mar 2015
First published
31 Mar 2015

RSC Adv., 2015,5, 33098-33104

Author version available

Photonic design of embedded dielectric scatterers for dye sensitized solar cells

M. M. Byranvand, A. Dabirian, A. N. Kharat and N. Taghavinia, RSC Adv., 2015, 5, 33098 DOI: 10.1039/C5RA04020E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements