Issue 71, 2015

Ni–Co alloy nanostructures anchored on mesoporous silica nanoparticles for non-enzymatic glucose sensor applications

Abstract

Uniform sized Ni–Co alloy nanoparticles were effectively confined over the active channels of mesoporous silica nanoparticles (MSN) using a simple chemical reduction method, and the resultant nanostructures exhibited a spherical configuration with a mean diameter of 5 nm. The face-centered cubic (fcc) crystalline structure of Ni and Ni–Co alloy nanoparticles and the amorphous structure of MSN matrix were identified from the diffraction patterns. The MSN supported catalysts were exploited as electrochemical probes for the detection of glucose, and the controlled morphology, smaller particle size, uniform dispersion and active surface of the Ni–Co alloy nanoparticles improved the excellent electrocatalytic activity of MSN/Ni–Co toward the electrooxidation of glucose. The MSN/Ni–Co nanocomposite exhibited good analytical performance for glucose detection, with a linear response ranging from 0.001 to 5.0 mM, a low detection limit of 0.39 μM and a high sensitivity of 536.62 μA mM−1 cm−2. The results of the performed experiments also demonstrated the good reproducibility, long-term stability and high selectivity of the fabricated sensors without the influence of interference from other oxidizable species, which may represent a technically sound and economical new avenue in non-enzymatic glucose sensor applications.

Graphical abstract: Ni–Co alloy nanostructures anchored on mesoporous silica nanoparticles for non-enzymatic glucose sensor applications

Article information

Article type
Paper
Submitted
07 May 2015
Accepted
15 Jun 2015
First published
02 Jul 2015

RSC Adv., 2015,5, 57804-57814

Ni–Co alloy nanostructures anchored on mesoporous silica nanoparticles for non-enzymatic glucose sensor applications

M. Ranjani, Y. Sathishkumar, Y. S. Lee, D. Jin Yoo, A. R. Kim and G. Gnana kumar, RSC Adv., 2015, 5, 57804 DOI: 10.1039/C5RA08471G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements