Issue 77, 2015

Supramolecular solvent based liquid–liquid microextraction of aluminum from water and hair samples prior to UV-visible spectrophotometric detection

Abstract

A new method for the microextraction of aluminum from water and hair samples has been developed using a supramolecular solvent (undecanol–tetrahydrofuran) prior to UV-visible spectrophotometric determination. 8-Hydroxyquinoline was used as chelating agent which forms a chelate with Al(III) at pH 8.0. The Al(III)-8-hydroxyquinoline chelate was quantitatively extracted into the supramolecular solvent (Ss) phase. The molar absorptivity calculated for the complex was 1.8 × 103 L mol cm−1 at 380 nm. Factors effecting extraction efficiency of the method including pH, amount of chelating agent, sample volume, type and volume of supramolecular solvent (Ss) and matrix effect were optimized. A pre-concentration factor of 30 was achieved with a limit of quantification of 0.47 μg L−1 with relative standard deviation of 0.3%. The accuracy of the developed method was evaluated by the analysis of the certified reference materials (SPS WW2 waste water, TMDA-53.3 fortified water and NCS ZC81002B human hair) and by addition-recovery studies for water and hair samples.

Graphical abstract: Supramolecular solvent based liquid–liquid microextraction of aluminum from water and hair samples prior to UV-visible spectrophotometric detection

Article information

Article type
Paper
Submitted
27 May 2015
Accepted
10 Jul 2015
First published
10 Jul 2015

RSC Adv., 2015,5, 62433-62438

Author version available

Supramolecular solvent based liquid–liquid microextraction of aluminum from water and hair samples prior to UV-visible spectrophotometric detection

M. Khan and M. Soylak, RSC Adv., 2015, 5, 62433 DOI: 10.1039/C5RA10046A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements