Issue 79, 2015

Vapor hydration of a simulated borosilicate nuclear waste glass in unsaturated conditions at 50 °C and 90 °C

Abstract

Vapor hydration of a simulated typical French nuclear intermediate-level waste (ILW) glass in unsaturated conditions has been studied in order to simulate its behaviour under repository conditions before complete saturation of the disposal site. The experiments were conducted for one year at 50 °C and 90 °C and the relative humidity (RH) was maintained at 92% and 95%. The glass hydration was followed by Fourier Transform Infra-Red spectroscopy (FTIR). The surface of the reacted glass was characterised by Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). The chemical and mineralogical composition of the alteration products were studied by Energy Dispersive X-ray Spectroscopy (EDX) and μ-Raman spectroscopy, respectively. The glass hydration increased with temperature and RH and led to the formation of a depolymerized gel layer depleted in alkalis. The glass hydration rate decreased with time and remained almost unchanged for the last three months of exposure. Overall, the ILW glass hydration rate was similar to that obtained with the SON68 high-level waste glass.

Graphical abstract: Vapor hydration of a simulated borosilicate nuclear waste glass in unsaturated conditions at 50 °C and 90 °C

Article information

Article type
Paper
Submitted
26 Jun 2015
Accepted
10 Jul 2015
First published
10 Jul 2015

RSC Adv., 2015,5, 64538-64549

Author version available

Vapor hydration of a simulated borosilicate nuclear waste glass in unsaturated conditions at 50 °C and 90 °C

A. Ait Chaou, A. Abdelouas, Y. El Mendili, R. Bouakkaz, S. Utsunomiya, C. Martin and X. Bourbon, RSC Adv., 2015, 5, 64538 DOI: 10.1039/C5RA12384D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements