Issue 117, 2015

Effect of different donor groups in bis(6-methoxylpyridin-2-yl) substituted co-sensitizer on the performance of N719 sensitized solar cells

Abstract

Three bis(6-methoxylpyridin-2-yl) substituted pyridine-anchor co-sensitizers with different donor groups are synthesized by 1,2-diaminobenzene (named L4), 1,2-diaminocyclohexane (named L5) and 1,4-butanediamine (named L6) with the aim to obtain rigid, semi-rigid and flexible co-sensitizer molecules, respectively. Their adaptability in N719 sensitized solar cells as co-sensitizers and the effects of their molecular rigidity, conjugation and co-planarity on the performance of DSSCs are studied. The results show that these three co-sensitizers are suitable to use in N719 sensitized solar cells. However, due to the different donor groups in the molecular structure, the co-sensitization performance of the rigid co-sensitizer with a large conjugate system is better than that of semi-rigid and flexible co-sensitizers. A short circuit current density of 13.27 mA cm−2, an open circuit voltage of 0.73 V and a fill factor of 0.63 corresponding to an overall conversion efficiency of 6.16% under AM 1.5G solar irradiation were achieved when rigid L4 was used as the co-sensitizer, which is 30% higher than that for DSSCs only sensitized by N719 (5.37%) under the same conditions. Mechanistic investigations are carried out by various spectral and electrochemical characterizations.

Graphical abstract: Effect of different donor groups in bis(6-methoxylpyridin-2-yl) substituted co-sensitizer on the performance of N719 sensitized solar cells

Article information

Article type
Paper
Submitted
21 Sep 2015
Accepted
03 Nov 2015
First published
06 Nov 2015

RSC Adv., 2015,5, 96934-96944

Author version available

Effect of different donor groups in bis(6-methoxylpyridin-2-yl) substituted co-sensitizer on the performance of N719 sensitized solar cells

L. Wei, Y. Yang, Z. Zhu, R. Fan, P. Wang, Y. Dong and S. Chen, RSC Adv., 2015, 5, 96934 DOI: 10.1039/C5RA19417B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements