Issue 25, 2015

Microwave shielding properties of Co/Ni attached to single walled carbon nanotubes

Abstract

Cobalt/nickel nanoparticles attached to single-walled carbon nanotubes (Co/Ni@SWCNTs) were prepared by dc-arc discharge technique. Co/Ni@SWCNTs were characterized by scanning electron microscopy, high resolution transmission electron microscopy (HRTEM), Raman spectroscopy and energy dispersive X-ray analysis techniques. HRTEM results confirmed attachment of magnetic nanoparticles onto SWCNTs having 1.2 nm diameter. A microwave shielding effectiveness value of 24 dB (blocking >99% radiation) by a 1.5 mm thick sample in the frequency range of 12.4–18 GHz was observed. In order to understand the mechanism of shielding, dielectric and magnetic attributes of the shielding effectiveness of Co/Ni@SWCNTs have been evaluated. Eddy currents and natural resonances due to the presence of magnetic nanoparticles, electronic polarization and their relaxation, interfacial polarization and unique composition of the shield contributed significantly in achieving good shielding effectiveness. The observed microwave shielding crossed the limit required for commercial applications which suggests that these nanocomposites are promising microwave shielding materials in the Ku band.

Graphical abstract: Microwave shielding properties of Co/Ni attached to single walled carbon nanotubes

Supplementary files

Article information

Article type
Communication
Submitted
01 Apr 2015
Accepted
13 May 2015
First published
13 May 2015

J. Mater. Chem. A, 2015,3, 13203-13209

Author version available

Microwave shielding properties of Co/Ni attached to single walled carbon nanotubes

B. P. Singh, D. K. Saket, A. P. Singh, S. Pati, T. K. Gupta, V. N. Singh, S. R. Dhakate, S. K. Dhawan, R. K. Kotnala and R. B. Mathur, J. Mater. Chem. A, 2015, 3, 13203 DOI: 10.1039/C5TA02381E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements