Issue 36, 2015

A high energy density asymmetric all-solid-state supercapacitor based on cobalt carbonate hydroxide nanowire covered N-doped graphene and porous graphene electrodes

Abstract

In order to achieve high energy densities, an asymmetric all-solid-state supercapacitor is developed by synthesizing a novel composite of cobalt carbonate hydroxide (CCH) nanowire covered N-doped graphene (NG) as positive and porous NG as negative electrodes. The CCH–NG composite is obtained from a one-step hydrothermal method, where optimization of the CCH content triples the specific capacitance of porous NG, reaching 1690 F g−1 at 1.0 A g−1. The optimal composite exhibits a remarkable cycling stability retaining 94.2% of the initial capacitance after 10 000 cycles, and good rate capability (still 1358 F g−1 at 10 A g−1). The assembled asymmetric supercapacitor based on the optimal composite has a high discharge areal capacitance of 153.5 mF cm−2 (at 1.0 mA cm−2), can cycle reversibly in the high-voltage region of 0–1.9 V, and thus provide superior energy and power densities (0.77 W h m−2 and 25.3 W m−2).

Graphical abstract: A high energy density asymmetric all-solid-state supercapacitor based on cobalt carbonate hydroxide nanowire covered N-doped graphene and porous graphene electrodes

Supplementary files

Article information

Article type
Paper
Submitted
08 Jul 2015
Accepted
31 Jul 2015
First published
31 Jul 2015

J. Mater. Chem. A, 2015,3, 18505-18513

A high energy density asymmetric all-solid-state supercapacitor based on cobalt carbonate hydroxide nanowire covered N-doped graphene and porous graphene electrodes

H. Xie, S. Tang, J. Zhu, S. Vongehr and X. Meng, J. Mater. Chem. A, 2015, 3, 18505 DOI: 10.1039/C5TA05129K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements