Issue 27, 2015

Enhanced thermoelectric performance through carrier scattering at heterojunction potentials in BiSbTe based composites with Cu3SbSe4 nanoinclusions

Abstract

Thermoelectric materials with the thermoelectric figure of merit, ZT, being much larger than unit at near room temperature are vital for power generation by using low-grade waste heat. Here we show that by incorporating very small proportion (1 vol%) of Cu3SbSe4 nanoparticles into the BiSbTe matrix to form nanocomposites, besides large (∼50%) reduction of lattice thermal conductivity, both enhanced thermopower through energy-dependent scattering and alleviated reduction of carrier mobility via carrier scattering at heterojunction potentials occur at elevated temperatures, which allow the thermoelectric power factor of the composite material to reach ∼37 μW cm−1 K−2 at 467 K. Consequently, a largest value of ZT = 1.6 is achieved at 476 K. Moreover, it has excellent performance in a broad temperature range (say, ZT = 1.0 at 300 K and ZT = 1.5 at 500 K), which makes this material attractive for cooling and power generation.

Graphical abstract: Enhanced thermoelectric performance through carrier scattering at heterojunction potentials in BiSbTe based composites with Cu3SbSe4 nanoinclusions

Article information

Article type
Paper
Submitted
11 May 2015
Accepted
04 Jun 2015
First published
05 Jun 2015

J. Mater. Chem. C, 2015,3, 7045-7052

Author version available

Enhanced thermoelectric performance through carrier scattering at heterojunction potentials in BiSbTe based composites with Cu3SbSe4 nanoinclusions

Y. Li, D. Li, X. Qin, X. Yang, Y. Liu, J. Zhang, Y. Dou, C. Song and H. Xin, J. Mater. Chem. C, 2015, 3, 7045 DOI: 10.1039/C5TC01318F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements