Issue 48, 2015

Structure and local polar domains of Dy-modified BiFeO3–PbTiO3 multiferroic solid solutions

Abstract

To investigate the effects of dysprosium ions on the crystal structure and multiferroic properties of the bismuth ferrite-based systems, Dy-substituted solid solutions of 0.66Bi1−xDyxFeO3–0.34PbTiO3, with x = 0, 0.05, 0.1, 0.15, 0.2, 0.3, 0.4 and 0.5, have been synthesized and characterized. With increasing concentration of Dy, the crystal structure transforms from a primarily tetragonal P4mm phase to a rhombohedral R3c phase. Moreover, the R3c (or monoclinic Cc) phase is found to coexist with the P4mm phase in the composition range of 0 ≤ x < 0.2, which is attributed to the effect of Dy that favours the rhombohedral structure. Interestingly, the ferroelectric phase transition temperature TC increases with increasing Dy concentration for compositions with x ≥ 0.1. This is explained by the crystal structural effect that compensates the dilution effect of ferroelectrically active Bi3+. Piezoresponse force microscopy (PFM) imaging reveals the formation of 180° polar domains, which can be switched by applying electric fields through the PFM tip, confirming the ferroelectricity. A partial phase diagram is established in terms of composition and temperature. It describes the crystal structure and ferroelectric phases, as well as the solubility limit, of the Bi1−xDyxFeO3–PbTiO3 solid solution system.

Graphical abstract: Structure and local polar domains of Dy-modified BiFeO3–PbTiO3 multiferroic solid solutions

Associated articles

Article information

Article type
Paper
Submitted
27 Jul 2015
Accepted
04 Nov 2015
First published
05 Nov 2015

J. Mater. Chem. C, 2015,3, 12450-12456

Author version available

Structure and local polar domains of Dy-modified BiFeO3–PbTiO3 multiferroic solid solutions

J. Zhuang, J. Zhao, L. Su, H. Wu, A. A. Bokov, W. Ren and Z. Ye, J. Mater. Chem. C, 2015, 3, 12450 DOI: 10.1039/C5TC02289D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements