Issue 14, 2016

Graphene oxide-based electrochemical label-free detection of glycoproteins down to aM level using a lectin biosensor

Abstract

A label-free ultrasensitive impedimetric biosensor with lectin immobilised on graphene oxide (GO) for the detection of glycoproteins from 1 aM is shown here. This is the first time a functional lectin biosensor with lectin directly immobilised on a graphene-based interface without any polymer modifier has been described. The study also shows that hydrophilic oxidative debris present on GO has a beneficial effect on the sensitivity of (8.46 ± 0.20)% per decade for the lectin biosensor compared to the sensitivity of (4.52 ± 0.23)% per decade for the lectin biosensor built up from GO with the oxidative debris washed out.

Graphical abstract: Graphene oxide-based electrochemical label-free detection of glycoproteins down to aM level using a lectin biosensor

Supplementary files

Article information

Article type
Communication
Submitted
05 Apr 2016
Accepted
28 May 2016
First published
31 May 2016

Analyst, 2016,141, 4278-4282

Graphene oxide-based electrochemical label-free detection of glycoproteins down to aM level using a lectin biosensor

L. Klukova, J. Filip, S. Belicky, A. Vikartovska and J. Tkac, Analyst, 2016, 141, 4278 DOI: 10.1039/C6AN00793G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements