Issue 18, 2016

Direct analysis of total tannins encapsulated in silica matrices by ultraviolet-visible diffuse reflectance spectroscopy

Abstract

Tannins from Acacia mearnsii were encapsulated by four different sol–gel routes (acid-catalyzed hydrolytic, basic-catalyzed hydrolytic, non-hydrolytic and silica) and were quantified by diffuse reflectance spectroscopy in the ultraviolet-visible region (DRS UV-vis). Calibration curves were prepared by adding tannin solutions at different concentrations to silica (via standard addition) and by the encapsulation of tannins by four different sol–gel routes at the same concentrations. The standard addition method on a silica matrix provided poor linear calibration curves due to tannin oxidation. The present study demonstrated the feasibility of using DRS UV-vis as a tool for the quantification of tannins in a silica matrix and identified conditions necessary for obtaining reliable quantitative data. Confocal microscopy measurements indicated that the prepared standards consisted of uniformly distributed materials, but colorimetric measurements indicated that the color change, probably due to tannin oxidation, might affect the feasibility of the measurements by diffuse reflectance. This approach represents a potential alternative for the quantification of the total tannins encapsulated in solid matrices in applications such as natural additives for intelligent packaging, antimicrobiological patches and leather tanning.

Graphical abstract: Direct analysis of total tannins encapsulated in silica matrices by ultraviolet-visible diffuse reflectance spectroscopy

Article information

Article type
Paper
Submitted
09 Dec 2015
Accepted
05 Apr 2016
First published
05 Apr 2016

Anal. Methods, 2016,8, 3774-3779

Direct analysis of total tannins encapsulated in silica matrices by ultraviolet-visible diffuse reflectance spectroscopy

C. Santos and J. H. Z. dos Santos, Anal. Methods, 2016, 8, 3774 DOI: 10.1039/C5AY03226A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements