Issue 6, 2016

Laser-driven phase transitions in aqueous colloidal gold nanoparticles under high pressure: picosecond pump–probe study

Abstract

Pump–probe transient extinction spectroscopy was used to analyze 355 nm picosecond laser heating-induced phenomena in 60 nm-diameter aqueous gold nanoparticles (AuNPs) under a high pressure of 60 MPa. Kinetic spectroscopy revealed that a supercritical layer surrounding the AuNP nucleated with a lifetime of approximately 1 ns during its dynamic expansion and decay for a fluence of 19.6 mJ cm−2. Moreover, in the post-mortem transmission electron micrographs we observed a number of fragments, a small percentage of size-reduced cores, and erupted particles among the intact particles after 60 shots, suggesting that evaporation occurred under laser illumination. The particle temperature calculation indicated that evaporation begins with a liquid droplet AuNP surrounded by a supercritical layer at temperatures below the boiling point of gold. By applying high pressure, we obtained a clear picture of the evaporation event, which was not possible at ambient pressure because bubble formation caused particle temperatures to rise uncontrollably. In this study, we shed light on the critical role of the supercritical layer formed around the AuNP under high pressure during laser-induced evaporation.

Graphical abstract: Laser-driven phase transitions in aqueous colloidal gold nanoparticles under high pressure: picosecond pump–probe study

Supplementary files

Article information

Article type
Paper
Submitted
01 Dec 2015
Accepted
12 Jan 2016
First published
14 Jan 2016

Phys. Chem. Chem. Phys., 2016,18, 4994-5004

Author version available

Laser-driven phase transitions in aqueous colloidal gold nanoparticles under high pressure: picosecond pump–probe study

S. Hashimoto, T. Katayama, K. Setoura, M. Strasser, T. Uwada and H. Miyasaka, Phys. Chem. Chem. Phys., 2016, 18, 4994 DOI: 10.1039/C5CP07395B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements