Issue 4, 2016

A mild biomass pretreatment using γ-valerolactone for concentrated sugar production

Abstract

Here we report that γ-valerolactone (GVL), a biomass-derived solvent, can be used to facilitate the mild pretreatment of lignocellulosic biomass. An 80% GVL, 20% water solvent system was used to pretreat hardwood at the mild temperature of 120 °C with an acid loading of 75 mM H2SO4. Up to 80% of original lignin was removed with 96–99% of original cellulose retained in the pretreated substrates. The use of a mild temperature and low acid concentrations caused negligible degradation of sugars. Up to 99% of the original glucan and 96% of the original xylan could be recovered after pretreatment. The pretreated substrate was quantitatively converted to sugars (99% and 100% total glucose and xylose yield) with an enzyme loading of 15 FPU g−1 glucan. These digestibilities were three times higher than those obtained when using other organic solvents such as tetrahydrofuran or ethanol, and 20 times higher than when pure water was used during pretreatment. Over 99.5% of GVL could be recovered by liquid–CO2 extraction of the pretreated slurries while removing less than 1% of the sugars. This approach produced pretreatment slurries that could easily undergo high-solids (30% w/v) enzymatic hydrolysis without any substrate washing or drying. We obtained glucose and xylose yields of up to 90% and 97%, respectively, and generated sugar streams with sugar concentrations up to 182 g L−1.

Graphical abstract: A mild biomass pretreatment using γ-valerolactone for concentrated sugar production

Supplementary files

Article information

Article type
Communication
Submitted
15 Oct 2015
Accepted
30 Nov 2015
First published
01 Dec 2015

Green Chem., 2016,18, 937-943

Author version available

A mild biomass pretreatment using γ-valerolactone for concentrated sugar production

L. Shuai, Y. M. Questell-Santiago and J. S. Luterbacher, Green Chem., 2016, 18, 937 DOI: 10.1039/C5GC02489G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements