Issue 19, 2016

Kesterite Cu2Zn(Sn,Ge)(S,Se)4 thin film with controlled Ge-doping for photovoltaic application

Abstract

Cu2ZnSn(S,Se)4 (CZTSSe) semiconductors have been a focus of extensive research effort owing to low-toxicity, high abundance and low material cost. Yet, the CZTSSe thin film solar cell has a low open-circuit voltage value that presents challenges. Herein, using GeSe2 as a new Ge source material, we have achieved a wider band gap CZTSSe-based semiconductor absorber layer with its band-gap controlled by adjusting the ratio of SnS2 : GeSe2 used. In addition, the Cu2Zn(Sn,Ge)(S,Se)4 thin films were prepared with optimal Ge doping (30%) and solar cells were fabricated to attain a respectable power conversion efficiency of 4.8% under 1.5 AM with an active area of 0.19 cm2 without an anti-reflection layer.

Graphical abstract: Kesterite Cu2Zn(Sn,Ge)(S,Se)4 thin film with controlled Ge-doping for photovoltaic application

Supplementary files

Article information

Article type
Paper
Submitted
02 Feb 2016
Accepted
14 Apr 2016
First published
14 Apr 2016

Nanoscale, 2016,8, 10160-10165

Kesterite Cu2Zn(Sn,Ge)(S,Se)4 thin film with controlled Ge-doping for photovoltaic application

W. Zhao, D. Pan and S. (. Liu, Nanoscale, 2016, 8, 10160 DOI: 10.1039/C6NR00959J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements