Issue 29, 2016

Salt-induced formation of hollow and mesoporous CoOx/SiO2 spheres and their catalytic behavior in toluene oxidation

Abstract

Hollow and mesoporous CoOx/SiO2 spheres (denoted as CoOx/hSiO2 and CoOx/mSiO2) were synthesized via salt-assisted ultrasonic spray pyrolysis. Precursor solutions containing sodium silicate solution, a mineral acid (hydrochloric acid or nitric acid) and a cobalt salt were ultrasonically aerosolized and pyrolyzed. Results showed that CoOx/SiO2 spheres with hollow or mesoporous structure can be fabricated by using the NaCl and NaNO3 salts as in situ formed templates. Significantly, this approach avoids the need for post-calcination for template elimination, instead permitting aqueous removal with water. The influence of the sodium salts on the characteristics of CoOx/SiO2 spheres was investigated by means of XRD, nitrogen physisorption, SEM/TEM, ICP-MS, UV-Vis, XPS and H2-TPR. On the basis of the experimental results, a possible mechanism on the formation of hollow and mesoporous spheres was proposed. The CoOx/SiO2 spheres were tested as catalysts for toluene oxidation. The mesoporous CoOx/mSiO2 was found to exhibit superior activity to hollow CoOx/hSiO2, probably attributed to a combination of several factors, including the predominant existence of a Co3O4 active phase, high surface Co3+ content, and easy reducibility of Co3+ at low temperature.

Graphical abstract: Salt-induced formation of hollow and mesoporous CoOx/SiO2 spheres and their catalytic behavior in toluene oxidation

Supplementary files

Article information

Article type
Paper
Submitted
22 Dec 2015
Accepted
26 Feb 2016
First published
26 Feb 2016

RSC Adv., 2016,6, 24304-24313

Salt-induced formation of hollow and mesoporous CoOx/SiO2 spheres and their catalytic behavior in toluene oxidation

L. Lin and H. Bai, RSC Adv., 2016, 6, 24304 DOI: 10.1039/C5RA27488E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements