Issue 32, 2016

Ultrafast breathing humidity sensing properties of low-dimensional Fe-doped SnO2 flower-like spheres

Abstract

Low-dimensional Fe-doped SnO2 flower-like nanospheres are synthesized by a simple template- and surfactant-free hydrothermal method. Interestingly, the hierarchical nanostructures not only show a low dimension (the diameter is ca. 200 nm), but also present a dramatic humidity sensitivity compared with the undoped ones. These obviously enhanced properties are probably ascribed to the strong affinity of Fe3+ ions on the SnO2 (101) interface in the alkaline conditions and the complex band configuration of the γ-Fe2O3/SnO2 Schottky contact. 2% Fe-doped SnO2 humidity sensors exhibit outstanding thermal stability (weight loss less than 2.5%), exceptionally fast response/recovery speed (<1@4 s, 95% relative humidity), as well as ultrahigh humidity sensitivity (S = 6479.5). Besides, Fe-doped SnO2 sensors possess excellent breathing sensing properties, superior to most of the reported SnO2-based humidity sensors under the same conditions. These results open the door for ultrafast breathing sensing and the potential application of touchless user interfaces to traditional metal oxide based humidity sensors.

Graphical abstract: Ultrafast breathing humidity sensing properties of low-dimensional Fe-doped SnO2 flower-like spheres

Supplementary files

Article information

Article type
Paper
Submitted
23 Dec 2015
Accepted
06 Mar 2016
First published
08 Mar 2016

RSC Adv., 2016,6, 27008-27015

Ultrafast breathing humidity sensing properties of low-dimensional Fe-doped SnO2 flower-like spheres

Y. Zhen, F. Sun, M. Zhang, K. Jia, L. Li and Q. Xue, RSC Adv., 2016, 6, 27008 DOI: 10.1039/C5RA27572E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements