Issue 44, 2016

Dodecylamine-derived thin carbon-coated single Fe3O4 nanocrystals for advanced lithium ion batteries

Abstract

Dodecylamine (DDA) was functionalized on Fe2O3 nanocrystals (NCs) by a solvothermal process to allow electrostatic interaction on Brønsted acid sites induced on the surface of NCs, followed by carbonization to convert DDA into a thin layer of carbon on single Fe3O4 NCs. The obtained carbon composite (IOC-Fe3O4) is composed of Fe3O4 NCs a few nanometers in size, each uniformly coated with a thin carbon layer. The carbon coating reduces the resistance at the NC-to-NC interface within the composite and retains a short lithium diffusion length by inhibiting crystal growth, as well as accommodating the volume change of Fe3O4 during charge–discharge. The composite electrode exhibited a high reversible capacity of 1027 mA h g−1 in a lithium ion battery, as well as 100% capacity retention after 300 cycles and rate performance of 563 mA h g−1 at 3 A g−1, which was achieved with only 4.2 wt% carbon in the composite. The relationship between the enhanced diffusion kinetics of IOC-Fe3O4 and excellent electrochemical performances is demonstrated through a voltammetric charge technique.

Graphical abstract: Dodecylamine-derived thin carbon-coated single Fe3O4 nanocrystals for advanced lithium ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
25 Jan 2016
Accepted
07 Apr 2016
First published
18 Apr 2016

RSC Adv., 2016,6, 37923-37928

Dodecylamine-derived thin carbon-coated single Fe3O4 nanocrystals for advanced lithium ion batteries

M. Cho, S. Yoon, K. Kim, D. S. Jung and K. C. Roh, RSC Adv., 2016, 6, 37923 DOI: 10.1039/C6RA02205G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements