Issue 53, 2016

Effect of Fe(iii) on the performance of sediment microbial fuel cells in treating waste-activated sludge

Abstract

Chemical energy stored in organic waste can be directly converted into electricity using sediment microbial fuel cell (SMFC) technology. The present study showed that adding Fe(III) enhanced the generation of electricity and degradation of waste-activated sludge (WAS) by increasing the content of c-type cytochromes (Cyt c) within the anode biofilm of SMFC reactors. With addition of 500 mg L−1 Fe(III), the cell voltage increased to 501.0 mV from 187.1 mV and VSS removal of WAS increased to 37.21% from 31.47% in the control. The content of crude Cyt c per mg biomass increased to 13.05 μg mg−1 in the SMFC-500 anode biofilm from 3.86 μg mg−1 in the control. However, the electron-transfer efficiencies of Cyt c were 2.25 mol-electron per μg in the SMFC-500 reactor and 3.64 mol-electron per μg in the control, showing that the addition of Fe(III) slightly inhibited the activity of Cyt c. Purified Cyt c possessed a molecular mass of 24 310 Da with 4.7 mol heme groups, and its secondary structure had 21% α-helix, 13.5% β-sheet, and was 31.3% unordered. Proteobacteria and iron-reducing bacteria within the SMFC anode biofilm were enriched by 500 mg L−1 Fe(III), but this same amount inhibited archaea colonization and decreased the diversity of the microbial community without an obvious difference in the dominant phylum.

Graphical abstract: Effect of Fe(iii) on the performance of sediment microbial fuel cells in treating waste-activated sludge

Article information

Article type
Paper
Submitted
28 Jan 2016
Accepted
10 May 2016
First published
11 May 2016

RSC Adv., 2016,6, 47974-47980

Effect of Fe(III) on the performance of sediment microbial fuel cells in treating waste-activated sludge

Y. N. Zhao, X. F. Li, Y. P. Ren and X. H. Wang, RSC Adv., 2016, 6, 47974 DOI: 10.1039/C6RA02532C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements