Issue 35, 2016

Catalytic transformation of glycerol to 1-propanol by combining zirconium phosphate and supported Ru catalysts

Abstract

The one-pot hydrogenolysis of biomass-derived glycerol to 1-propanol has been investigated over sequential two-layer catalysts in a continuous-flow fixed-bed reactor. The zirconium phosphate layer was packed in the upper layer for dehydration of glycerol into acrolein and the supported Ru catalysts were in the second layer for the sequential hydrogenation of acrolein to 1-propanol. It was observed that the second layer catalyst with the strong acid sites would cause the formation of glycerol degradation products such as methanol, ethanol, methane and carbon dioxide etc., while 2%Ru/SiO2 with weak acid sites afforded the highest selectivity for 1-propanol. The sequential packing of zirconium phosphate and the 2%Ru/SiO2 catalytic system can give full glycerol conversions at 77% selectivity of 1-propanol, as well as exhibiting long-term stability (80 h). Carbonaceous deposits were a main reason for deactivation and the deactivated catalysts can be regenerated conveniently by calcinations in air. The present approach afforded an effective one-pot hydrogenolysis of glycerol to biopropanol, which could bring about the benign development of the biodiesel industry.

Graphical abstract: Catalytic transformation of glycerol to 1-propanol by combining zirconium phosphate and supported Ru catalysts

Supplementary files

Article information

Article type
Paper
Submitted
29 Jan 2016
Accepted
14 Mar 2016
First published
16 Mar 2016

RSC Adv., 2016,6, 29769-29778

Catalytic transformation of glycerol to 1-propanol by combining zirconium phosphate and supported Ru catalysts

M. Wang, H. Yang, Y. Xie, X. Wu, C. Chen, W. Ma, Q. Dong and Z. Hou, RSC Adv., 2016, 6, 29769 DOI: 10.1039/C6RA02682F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements