Issue 62, 2016

Highly proton conducting MoS2/graphene oxide nanocomposite based chemoresistive humidity sensor

Abstract

This paper reports the development of MoS2/GO nanocomposite based sensing layers for resistive humidity sensors. The MoS2 nanoflakes were synthesized through liquid exfoliation and GO was synthesized using modified Hummers method. The nanocomposite was drop-cast on a Si/SiO2 substrate containing aluminium electrodes to fabricate the sensor device. The best performance was shown by the 1 : 4 (MoS2/GO) composite. Various characterization techniques like Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and Fourier Transform Infrared Spectroscopy (FTIR) were used to verify the composite formation. The sensing response was found to lie between 55 times at 35% RH and 1600 times at 85% RH. Such a high response is believed to be because of proton conductivity in the water layer for both MoS2 and GO. The sensor performance was found to be repeatable even after three months of the first measurement with quick response and recovery. Thus the authors believe that the excellent sensitivity coupled with low cost synthesis and resistive sensing will make their work useful to develop new generation humidity sensors.

Graphical abstract: Highly proton conducting MoS2/graphene oxide nanocomposite based chemoresistive humidity sensor

Supplementary files

Article information

Article type
Paper
Submitted
08 May 2016
Accepted
25 May 2016
First published
26 May 2016

RSC Adv., 2016,6, 57424-57433

Highly proton conducting MoS2/graphene oxide nanocomposite based chemoresistive humidity sensor

D. Burman, R. Ghosh, S. Santra and P. K. Guha, RSC Adv., 2016, 6, 57424 DOI: 10.1039/C6RA11961A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements