Issue 109, 2016, Issue in Progress

Electric field-assisted ultrafast synthesis of nanopowders: a novel and cost-efficient approach

Abstract

A current trend in materials processing is the synthesis of high-reactivity powders with a particle size averaged at the nanoscopic scale. This is normally achieved by considering chemical routes that allow processing of the materials at temperatures markedly lower than those required in the conventional method. Here we introduce a simple but novel approach that enables ultrafast synthesis of materials by using electric fields. The case of CaCu3Ti4O12, where traditional chemical methods have usually revealed unable to synthesize a nanosized single-phase powder, is presented. In zero-field processing, the end-product powder prepared here via a modified polymeric precursor method exhibited, for instance, an average particle size of 300 nm. In the following, we show that thermal cycling of the precursor powder under an electric field input leads to a substantial drop in synthesis temperature, attributable to enhanced charge diffusion processes, ending with an average particle size sensibly reduced and, finally, rendering possible the production of nanopowders (<100 nm) by adjusting the maximum electric current allowed to flow across the material during processing.

Graphical abstract: Electric field-assisted ultrafast synthesis of nanopowders: a novel and cost-efficient approach

Article information

Article type
Paper
Submitted
23 Jul 2016
Accepted
31 Oct 2016
First published
31 Oct 2016

RSC Adv., 2016,6, 107208-107213

Electric field-assisted ultrafast synthesis of nanopowders: a novel and cost-efficient approach

L. M. Jesus, R. S. Silva, R. Raj and J. M'Peko, RSC Adv., 2016, 6, 107208 DOI: 10.1039/C6RA18734J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements