Issue 24, 2016

A H5BW12O40–polyvinyl alcohol polymer electrolyte and its application in solid supercapacitors

Abstract

A polymer electrolyte comprised of H5BW12O40 (BWA) and cross-linked polyvinyl alcohol (BWA–XLPVA) has been developed and characterized for solid supercapacitors. The performance of this polymer electrolyte was compared to that of a known polymer electrolyte based on H4SiW12O40 (SiWA). An enhanced proton conductivity was observed for BWA–XLPVA compared to its SiWA counterpart, especially under low humidity conditions (5% RH). Dielectric analyses revealed an increase of proton density and proton mobility in the BWA-based electrolyte. A solid-state 1H NMR study showed that all protons in the BWA-based electrolyte were hydrated in the low humidity environment. This indicated that BWA had more crystallized water content than SiWA, resulting in higher proton mobility in the PVA matrix. An in situ tracking of electrode potential in solid supercapacitors was utilized to identify the reactions and the factors limiting solid supercapacitor cell voltage for both BWA- and SiWA-based polymer electrolyte systems. A solid device leveraging the BWA-based polymer electrolyte achieved a cell voltage of 1.3 V, 0.2 V wider than that of a SiWA-based device.

Graphical abstract: A H5BW12O40–polyvinyl alcohol polymer electrolyte and its application in solid supercapacitors

Article information

Article type
Paper
Submitted
18 Apr 2016
Accepted
24 May 2016
First published
24 May 2016

J. Mater. Chem. A, 2016,4, 9585-9592

Author version available

A H5BW12O40–polyvinyl alcohol polymer electrolyte and its application in solid supercapacitors

H. Gao and K. Lian, J. Mater. Chem. A, 2016, 4, 9585 DOI: 10.1039/C6TA03196J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements