Issue 46, 2017

Epitaxial growth of single crystalline film scintillators based on the Pr3+ doped solid solution of Lu3Al5−xGaxO12 garnet

Abstract

UV emitting scintillating screens based on single crystalline films (SCFs) of Lu3Al5−xGaxO12:Pr garnet have been developed by the liquid phase epitaxy (LPE) growth method onto Y3Al5O12 (YAG) substrates using a lead-free BaO based flux. The absorbance, luminescence and scintillation properties of these SCFs have been investigated depending on the Ga content in the x = 0–1.9 range. We have found that the absorption and luminescence spectra of Pr3+ ions as well as the scintillation light yield (LY) and decay kinetics of Lu3Al5−xGaxO12 SCFs are non-linearly affected by the gallium concentration x in the mentioned solid solution due to preference for the distribution of Ga3+ and Al3+ ions between the tetrahedral and octahedral positions of the garnet host, respectively. The best scintillation properties of Lu3Al5−xGaxO12:Pr SCFs are achieved at the Ga content in the x = 1.0–1.2 range. The LY of the Lu3Ga1.2Al3.8O12:Pr SCF is comparable with the LY of the best reference LuAG:Pr single crystal counterpart and significantly (up to 3 times) overcomes the LY of LuAG:Pr and Lu3Al4–3.5Ga1.0–1.5O12 SCFs, grown onto the YAG substrates from the conventional PbO–B2O3 flux.

Graphical abstract: Epitaxial growth of single crystalline film scintillators based on the Pr3+ doped solid solution of Lu3Al5−xGaxO12 garnet

Article information

Article type
Paper
Submitted
26 Jul 2017
Accepted
09 Oct 2017
First published
09 Oct 2017

CrystEngComm, 2017,19, 7031-7040

Epitaxial growth of single crystalline film scintillators based on the Pr3+ doped solid solution of Lu3Al5−xGaxO12 garnet

V. Gorbenko, T. Zorenko, K. Paprocki, B. Machlovanyi, B. Mazalon, A. Fedorov, Ya. Zhydachevskyy, A. Suchocki and Yu. Zorenko, CrystEngComm, 2017, 19, 7031 DOI: 10.1039/C7CE01376K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements