Issue 4, 2017

Hydrogel-enabled osmotic pumping for microfluidics: towards wearable human-device interfaces

Abstract

This paper describes a technique that utilizes the osmotic properties of hydrogels to passively draw fluid through a membrane and pass it along to a microfluidic network for sensing purposes. This technique may enable non-invasive collection and manipulation of sweat for biosensing. To demonstrate the concept, thin hydrogel discs equilibrated in saline or glycerol were integrated with a microfluidic device. The hydrogel interfaces with a water-permeable membrane. The high concentration of solute in the hydrogel creates an osmotic pressure difference across the membrane, driving fluid flow through the membrane and into the device. The release of solute from the hydrogel autonomously pumps the fluid into an adjacent microfluidic channel. The flowrate of liquid drawn through the membrane is controlled by the osmotic pressure of the hydrogel and its interfacial contact area with the membrane. The flowrate gradually decreases over time as the continuous influx of withdrawn fluid dilutes the concentrated solute in the hydrogel. Initial testing has shown the device can pump accurate levels of glucose across the membrane and through a microchannel to a reservoir with a glucose sensor. Sensors and electrodes can be implemented in future microfluidic devices operating on these principles to test for other bioanalytes in sweat.

Graphical abstract: Hydrogel-enabled osmotic pumping for microfluidics: towards wearable human-device interfaces

Supplementary files

Article information

Article type
Paper
Submitted
05 Dec 2016
Accepted
24 Jan 2017
First published
26 Jan 2017

Lab Chip, 2017,17, 710-716

Hydrogel-enabled osmotic pumping for microfluidics: towards wearable human-device interfaces

T. Shay, M. D. Dickey and O. D. Velev, Lab Chip, 2017, 17, 710 DOI: 10.1039/C6LC01486K

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements