Issue 2, 2017

Generating one-dimensional micro- or nano-structures with in-plane alignment by vapor-driven wetting kinetics

Abstract

The wetting of a droplet on a particular solid surface of a thin liquid film followed by solvent drying is a crucial process for nanostructure formation. However, this thin liquid film was commonly observed to rupture due to the instability of the given surface. Herein, we developed a technique to control the dynamical kinetics of a solution droplet by the co-solvent vapor, which yielded a reversible spreading/dewetting process between the spherical droplet and the stable thin liquid layer on surfaces that are usually difficult to wet. Our theoretical model indicates that the wetting process is governed by the sorption of co-solvent vapor within the droplet, which alters the surface free energy, lowers the contact angle, reduces the liquid film thickness, and stabilizes the drying process. The obtained thin liquid films allow the in-plane alignment to generate one-dimensional nano- or micro-structures in the deposited materials, such as nanowires and organic crystals. In particular, in-plane aligned organic single crystals unveiled high field-effect mobility, up to 9.1 cm2 Vāˆ’1 sāˆ’1, in thin-film transistors.

Graphical abstract: Generating one-dimensional micro- or nano-structures with in-plane alignment by vapor-driven wetting kinetics

Supplementary files

Article information

Article type
Communication
Submitted
11 Oct 2016
Accepted
04 Jan 2017
First published
04 Jan 2017

Mater. Horiz., 2017,4, 259-267

Generating one-dimensional micro- or nano-structures with in-plane alignment by vapor-driven wetting kinetics

C. Liu, X. Liu, Y. Xu, H. Sun, Y. Li, Y. Shi, M. V. Lee, T. Yamada, T. Hasegawa, Y. Noh and T. Minari, Mater. Horiz., 2017, 4, 259 DOI: 10.1039/C6MH00411C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements