Issue 24, 2017

3D nitrogen-doped graphene gels as robust and sustainable adsorbents for dyes

Abstract

Herein, a series of 3D nitrogen-doped graphene gels (NG) were synthesized for the removal of dyes from wastewater. Their structures were characterized by XRD, SEM, TEM, elemental analysis, BET analysis, and XPS. It was found that the distribution of functional groups on the NG surface could be significantly affected using different nitrogen sources, which could further influence their adsorption behaviors. Among them, the hybrid prepared from hexamethylenediamine as the nitrogen source shows best adsorbability for acidic dyes, whereas the hybrid obtained from ethylenediamine displays largest adsorption capacity for basic dyes. Adsorption isotherms and kinetics were also investigated. The results indicate that the best interpretation is provided by the Langmuir isotherm equation, and the adsorption dynamic behavior is fit for the pseudo-first-order model. In addition, intra-particle diffusion kinetics manifest rate-controlling steps including external diffusion and intra-particle diffusion. Moreover, all adsorbents exhibit excellent reusability. Therefore, NG adsorbents show potential applicative value in the treatment of dye wastewater.

Graphical abstract: 3D nitrogen-doped graphene gels as robust and sustainable adsorbents for dyes

Associated articles

Supplementary files

Article information

Article type
Paper
Submitted
11 Aug 2017
Accepted
08 Nov 2017
First published
08 Nov 2017

New J. Chem., 2017,41, 15447-15457

3D nitrogen-doped graphene gels as robust and sustainable adsorbents for dyes

J. Geng, L. Si, H. Guo, C. Lin, Y. Xi, Y. Li, X. Yan, B. Wang and L. Chen, New J. Chem., 2017, 41, 15447 DOI: 10.1039/C7NJ02984E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements