Issue 7, 2017

Improvements of thermoelectric properties for p-type Cu1.8S bulk materials via optimizing the mechanical alloying process

Abstract

Polycrystalline bulk Cu1.8S materials were fabricated using mechanical alloying (MA) and spark plasma sintering (SPS). The microstructure and thermoelectric transport properties were investigated in detail with emphasis on the effect of the mechanical alloying ball-milling process. Cu1.8S single-phase powders were directly synthesized from the elemental powders. High-density (>95%) p-type Cu1.8S bulk samples were fabricated using the subsequent SPS process at 773 K for 5 min. A Cu1.96S second phase was detected in the bulk samples when the ball-milling time was increased to 3 h, and the Cu1.96S content increased with increasing ball-milling time. The electrical properties and Seebeck coefficient of the Cu1.8S bulk samples were dependent on the milling time of the starting powders. The Cu1.8S bulk that was sintered by SPS using the powder treated with a 3 h ball-milling obtained a record-high power factor of 1552 μW m−1 K−2 at 773 K for the Cu–S system, which is 40% higher than that of pristine Cu1.8S. The ZT value of the Cu1.8S bulk sample that was sintered by SPS using the 12 h ball-milling treated powder reached 0.71, which is 67% higher than the ZT value of the sample that was sintered using the powder with a 1 h ball-milling time.

Graphical abstract: Improvements of thermoelectric properties for p-type Cu1.8S bulk materials via optimizing the mechanical alloying process

Supplementary files

Article information

Article type
Research Article
Submitted
21 Apr 2017
Accepted
14 May 2017
First published
15 May 2017

Inorg. Chem. Front., 2017,4, 1192-1199

Improvements of thermoelectric properties for p-type Cu1.8S bulk materials via optimizing the mechanical alloying process

P. Qin, X. Qian, Z. Ge, L. Zheng, J. Feng and L. Zhao, Inorg. Chem. Front., 2017, 4, 1192 DOI: 10.1039/C7QI00208D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements