Issue 13, 2017

Application of magnetic Cd2+ ion-imprinted mesoporous organosilica nanocomposites for mineral wastewater treatment

Abstract

This work demonstrates a simple strategy for producing highly selective adsorption magnetic ion imprinted mesoporous silica (MIIMS) nanocomposites. They have been functionalized by a γ-(aminoethylamino)propyl chelating group for specific recognition and rapid removal of toxic heavy metal ions from wastewaters. The superparamagnetic Fe3O4 nanocrystal was encapsulated in an imprinted mesoporous organosilica shell via a co-condensation synthesis method. The results of transmission electron microscopy (TEM) and small angle X-ray diffraction (XRD) confirmed that the imprinted mesoporous organosilica shell preserved a highly ordered 2D mesostructure. The Brunauer–Emmett–Teller (BET) analysis found the surface area was 946 m2 g−1. The saturated adsorption capacity of MIIMS toward cadmium reached up to 25.2 mg g−1 (0.224 mmol g−1) at pH 5.0. The adsorption of cadmium reached an equilibrium within 4.5 min. The results of a selectivity study revealed that the adsorption capacity for Cd2+ is much high than other co-existing heavy metal ions. The adsorption efficiency of MIIMS was above 94.2% after six extraction-stripping cycles. The MIIMS can efficiently remove cadmium ions in water treatment applications.

Graphical abstract: Application of magnetic Cd2+ ion-imprinted mesoporous organosilica nanocomposites for mineral wastewater treatment

Article information

Article type
Paper
Submitted
02 Dec 2016
Accepted
16 Jan 2017
First published
23 Jan 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 7996-8003

Application of magnetic Cd2+ ion-imprinted mesoporous organosilica nanocomposites for mineral wastewater treatment

S. Cen, W. Li, S. Xu, Z. Wang, Y. Tang, H. Wang and C. Wei, RSC Adv., 2017, 7, 7996 DOI: 10.1039/C6RA27679B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements