Issue 47, 2017

Porous SnO2 hexagonal prism-attached Pd/rGO with enhanced electrocatalytic activity for methanol oxidation

Abstract

Porous SnO2 hexagonal prisms, as a new promoter, were attached to Pd-based systems held by a reduced graphene oxide (rGO) support (Pd–SnO2/rGO) for the catalysis of the electrooxidation reaction of methanol. Cyclic voltammetry (CV) tests revealed that the electrocatalytic activity and stability were substantially improved by SnO2 with a special morphology. The specific activity (SA, jk, area) and mass activity (MA, jk, area) of Pd–SnO2/rGO were enhanced 1.31 and 3.3 times those of the Pd/rGO catalyst, respectively. Moreover, the CO-tolerance was also remarkably enhanced due to the presence of SnO2. It is believed that higher surface areas, more active sites, which are offered by the porous architecture of SnO2, as well as the synergetic effect between all components contribute to the improvement of the catalytic activities of the Pd–SnO2/rGO catalysts. Cost savings and the CO-poisoning obstacle being surmounted, which are the two main probing directions for elevating the overall performance of direct methanol fuel cells, makes the as-prepared Pd–SnO2/rGO a promising electrocatalyst.

Graphical abstract: Porous SnO2 hexagonal prism-attached Pd/rGO with enhanced electrocatalytic activity for methanol oxidation

Article information

Article type
Paper
Submitted
30 Mar 2017
Accepted
25 May 2017
First published
08 Jun 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 29909-29915

Porous SnO2 hexagonal prism-attached Pd/rGO with enhanced electrocatalytic activity for methanol oxidation

Y. Hu, T. Mei, J. Li, J. Wang and X. Wang, RSC Adv., 2017, 7, 29909 DOI: 10.1039/C7RA03659K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements