Issue 40, 2017

Kinetics and gene diversity of denitrifying biocathode in biological electrochemical systems

Abstract

Cathodic denitrification using a bioelectrochemical system removes nitrogen at a low C/N ratio, and also harvests energy as electricity. Denitrifying biocathodes were cultured using three electrode systems with nitrate (NO3) and/or nitrite (NO2) as electron acceptors. Results showed that denitrification of NOx in biocathodes exhibit typical enzymatic reaction kinetics and denitrification rate follows the Monod equation, with rmax = 1.33 kg N m−3 d−1, Ks = 5.52 g L−1 for NO3 and rmax = 1.76 kg N m−3 d−1, Ks = 8.09 g L−1 for NO2, respectively. Optimal cathodic efficiency was obtained at an initial substrate concentration of 0.5 g L−1. A high-throughput sequencing analysis of 16S rRNA gene showed high biodiversity in a denitrifying biocathode and nitrite contributed more to the formation of cathodic microbial community structure. Denitrification functional gene analysis revealed Pseudomonas are effective denitrifiers in a biocathode.

Graphical abstract: Kinetics and gene diversity of denitrifying biocathode in biological electrochemical systems

Supplementary files

Article information

Article type
Paper
Submitted
10 Apr 2017
Accepted
24 Apr 2017
First published
10 May 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 24981-24987

Kinetics and gene diversity of denitrifying biocathode in biological electrochemical systems

Y. Zhang, W. Xu, Y. Xiang, B. Xie, H. Liu, L. Wu and D. Liang, RSC Adv., 2017, 7, 24981 DOI: 10.1039/C7RA04070A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements