Issue 60, 2017, Issue in Progress

Broadband quarter-wave plate based on dielectric-embedded plasmonic metasurface

Abstract

High transmission plasmonic and all-dielectric metasurface wave plates have been reported in recent studies. However, narrow bandwidth and low polarization conversion need to be addressed to attain even better operation requirements. In this work, we numerically demonstrate the concept of an ultrathin single layer plasmonic metasurface embedded with dielectric resonators. Our design is based on the transmission line theory and surface plasmon excitation to realize a quarter-wave plate with controllable birefringence. The controllability is achieved through manipulating relative permittivity of a non-dispersive dielectric material-embedded in a perforated silver film, and the surface dimensions of silver. We have also achieved higher degrees of linear-to-circular and circular-to-linear polarization conversions at broadband wavelengths in the near infrared compared with other conventional plasmonic metasurfaces. Moreover, the functioning of the wave plate is demonstrated on a compact and ultrathin metasurface showing great potential of integration into photonic sensors.

Graphical abstract: Broadband quarter-wave plate based on dielectric-embedded plasmonic metasurface

Article information

Article type
Paper
Submitted
11 Apr 2017
Accepted
02 Jul 2017
First published
31 Jul 2017
This article is Open Access
Creative Commons BY license

RSC Adv., 2017,7, 37495-37501

Broadband quarter-wave plate based on dielectric-embedded plasmonic metasurface

E. O. Owiti, H. Yang, C. F. Ominde and X. Sun, RSC Adv., 2017, 7, 37495 DOI: 10.1039/C7RA04103A

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements