Issue 50, 2017, Issue in Progress

Direct synthesis of platinum nanodots in ZIF-8/Fe3O4 core–shell hybrid nanoparticles

Abstract

A novel method was developed for synthesizing platinum nanodots inside zeolitic imidazolate framework nanostructures without using additional reducing agents. Fe3O4 magnetic nanoparticle clusters (MNCs) were synthesized and coated with ZIF-8 (ZIF) shells via a hydrothermal reaction. Upon addition of ZIF/MNC hybrid nanoparticles into a platinum precursor (K2PtCl4) solution, platinum ions were reduced to metallic platinum nanodots by the 2-methyl imidazolate groups. The resulting platinum nanodots were ∼2 nm in diameter and uniformly distributed in the pores of the ZIF layer. The catalytic activity of the platinum nanodots was examined by using Pt/ZIF/MNCs for the reduction of 4-nitrophenol. The resulting high catalytic activity was attributed to the high surface area of the platinum nanodots and the absence of capping layers. Furthermore, the hybrid nanoparticles were recovered using a permanent magnet and were found to maintain their catalytic activity after multiple cycles.

Graphical abstract: Direct synthesis of platinum nanodots in ZIF-8/Fe3O4 core–shell hybrid nanoparticles

Supplementary files

Article information

Article type
Paper
Submitted
27 Apr 2017
Accepted
13 Jun 2017
First published
16 Jun 2017
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2017,7, 31239-31243

Direct synthesis of platinum nanodots in ZIF-8/Fe3O4 core–shell hybrid nanoparticles

S. Lee, C. Yim and S. Jeon, RSC Adv., 2017, 7, 31239 DOI: 10.1039/C7RA04711H

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements