Issue 1, 2017

Surface charge transfer doping induced inversion layer for high-performance graphene/silicon heterojunction solar cells

Abstract

Graphene/silicon heterojunction solar cells have stimulated enormous research interests due to simple device architecture and low-cost solution-processing capability. Graphene can serve as p-type layer to form heterojunction with n-type crystalline Si. However, improvement of device performance is hindered by the relatively low junction height arising from the small work function of graphene. Herein, for the first time, we develop and implement a surface inversion layer on Si substrates by surface charge transfer doping (SCTD) scheme using a layer of high work function metal oxide (MoO3) as a hole injection layer on Si surface. Spontaneous hole injection from the MoO3 layer to Si led to the generation of a hole inversion layer on Si surface, greatly enhancing the built-in electric potential and suppressing the carrier recombination. The use of SCTD method, in combination with additional device optimization by graphene doping and polymer anti-reflection coating, results in a high power conversion efficiency approaching 12.2%. The SCTD scheme provides a new platform to further enhance the performance of graphene/silicon heterojunction solar cells.

Graphical abstract: Surface charge transfer doping induced inversion layer for high-performance graphene/silicon heterojunction solar cells

Supplementary files

Article information

Article type
Paper
Submitted
18 Aug 2016
Accepted
18 Nov 2016
First published
18 Nov 2016

J. Mater. Chem. A, 2017,5, 285-291

Surface charge transfer doping induced inversion layer for high-performance graphene/silicon heterojunction solar cells

K. Ding, X. Zhang, F. Xia, R. Wang, Y. Kuang, S. Duhm, J. Jie and X. Zhang, J. Mater. Chem. A, 2017, 5, 285 DOI: 10.1039/C6TA07100G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements