Issue 21, 2017

Highly anion conductive, alkyl-chain-grafted copolymers as anion exchange membranes for operable alkaline H2/O2 fuel cells

Abstract

In order to obtain anion exchange membranes (AEMs) with well-defined micro-phase separation and high ionic conductivity for operable alkaline H2/O2 fuel cells, we designed and prepared a series of alkyl-chain-grafted poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) AEMs containing side-chain-type quaternary ammonium (QA) groups via Cu(I)-catalyzed “click chemistry”. It has been demonstrated that a small amount of (10 mol%) grafted alkyl chains induced well-defined micro-phase separation of the obtained AEMs as confirmed by small-angle X-ray scattering (SAXS). Thus, the highest conductivity was observed for grafted PPO AEMs with an alkyl chain length of 16 carbon atoms (C-16). The side-chain-type QA groups gave the excellent alkaline stability of AEMs according to the change in hydroxide conductivity after alkaline stability testing. These quaternized, grafted copolymers were employed as membranes for alkaline H2/O2 fuel cells. The results suggested that the C-16 alkyl-chain-grafted membrane had a better initial performance due to its high hydroxide conductivity in spite of its lower IEC value or water uptake. In contrast, the corresponding comb-shaped copolymers having C-16 alkyl chains failed to serve as anion exchange membranes for practical fuel cells.

Graphical abstract: Highly anion conductive, alkyl-chain-grafted copolymers as anion exchange membranes for operable alkaline H2/O2 fuel cells

Article information

Article type
Paper
Submitted
15 Jan 2017
Accepted
19 Apr 2017
First published
19 Apr 2017

J. Mater. Chem. A, 2017,5, 10301-10310

Highly anion conductive, alkyl-chain-grafted copolymers as anion exchange membranes for operable alkaline H2/O2 fuel cells

C. Yang, L. Liu, X. Han, Z. Huang, J. Dong and N. Li, J. Mater. Chem. A, 2017, 5, 10301 DOI: 10.1039/C7TA00481H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements