Issue 26, 2017

Interface effect of mixed phase Pt/ZrO2 catalysts for HCHO oxidation at ambient temperature

Abstract

A series of high-efficiency Pt/ZrO2 catalysts were successfully prepared by simple methods on the basis of a ZrO2 support with a mixed monoclinic/tetragonal phase structure. The activity test results showed that the mixed phase catalysts exhibited higher catalytic activity than the pure monoclinic phase, and HCHO can be completely oxidized into CO2 and H2O at near ambient temperature. XRD, Raman and HRTEM results demonstrated that the monoclinic–tetragonal phase interface with abundant defects was formed due to the introduction of the tetragonal phase. According to the results of TEM, XPS and H2-TPR, the mixed phase interfacial structure can induce the formation of the active oxygen species, ionic Ptδ+ species, strong metal-support interaction and low-temperature reducibility, which was vital for the significant improvement of the catalytic activity. Furthermore, the specific HCHO reaction rate of the catalysts at 55 °C increased from 0.8 × 10−3 to 10.4 × 10−3 mmol h−1 m−2 and the activation energy decreased remarkably from 213.5 to 24.7 kJ mol−1 with the increase of the biphase interface content. In situ DRIFTS spectra showed that the special interfacial structure can change the reaction pathway of HCHO oxidation and inhibit the formation of inert carbonate species, thus greatly enhancing the HCHO oxidation activity.

Graphical abstract: Interface effect of mixed phase Pt/ZrO2 catalysts for HCHO oxidation at ambient temperature

Supplementary files

Article information

Article type
Paper
Submitted
05 May 2017
Accepted
30 May 2017
First published
31 May 2017

J. Mater. Chem. A, 2017,5, 13799-13806

Interface effect of mixed phase Pt/ZrO2 catalysts for HCHO oxidation at ambient temperature

X. Yang, X. Yu, M. Lin, M. Ge, Y. Zhao and F. Wang, J. Mater. Chem. A, 2017, 5, 13799 DOI: 10.1039/C7TA03888G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements