Issue 15, 2017

Injectable MnSr-doped brushite bone cements with improved biological performance

Abstract

Good mechanical properties and high injectability are the major requirements to ensure widespread application of calcium phosphate cements (CPCs) as bone substitutes in minimally invasive surgeries. However, obtaining CPCs that exhibit a good compromise between these two properties as well as good biological performance is still a great challenge. This study presents novel solutions to improve these properties, which include (i) co-doping β-tricalcium phosphate (β-TCP) powder with Sr and Mn, and (ii) adding small amounts of saccharides (sucrose or fructose) to the setting-liquid solution. The combination of these two strategies enabled full injectability and significantly increased the wet compressive strength of CPCs in comparison to undoped or solely Sr-doped CPCs. Furthermore, the proliferative response of human MG63 osteoblastic cells, their rate of collagen-I secretion, and particularly their growth behaviour on the cement surfaces were also enhanced. The overall improved relevant properties of Mn/Sr co-doped CPCs with added sucrose, including in vitro biological performance, renders them very promising materials for bone regeneration and tissue engineering.

Graphical abstract: Injectable MnSr-doped brushite bone cements with improved biological performance

Supplementary files

Article information

Article type
Paper
Submitted
30 Nov 2016
Accepted
13 Mar 2017
First published
15 Mar 2017

J. Mater. Chem. B, 2017,5, 2775-2787

Injectable MnSr-doped brushite bone cements with improved biological performance

P. M. C. Torres, A. Marote, A. R. Cerqueira, A. J. Calado, J. C. C. Abrantes, S. Olhero, O. A. B. da Cruz e Silva, S. I. Vieira and J. M. F. Ferreira, J. Mater. Chem. B, 2017, 5, 2775 DOI: 10.1039/C6TB03119F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements