Issue 37, 2017

Single quantum dot rectifying diode with tunable threshold voltage

Abstract

An ambient atmosphere single quantum dot (QDs) rectifying diode with tunable threshold voltage has been fabricated using cobalt (Co) doped CdS QDs with a device structure of ITO/ZnO/QDs. Current–voltage (IV) characterization of this device has been tested using ambient atmosphere scanning tunnelling microscope (STM). The scanning tunnelling spectra (STS) shows a very high rectification behavior of this single dot based device with a ratio of 103. The threshold voltage of this device decreases with increase in doping concentration of QDs. Reduction of this turn-on voltage occurs due to the formation of additional energy band of Co impurity within the band gap of QDs that exist closer to the valance band (VB) of CdS. Existence of this additional energy band has also been observed in the UV-VIS absorption data of Co doped CdS, which introduces an additional absorption peak in the near infrared region. This impurity band is fully populated at room temperature and the width of this band increases with doping concentration, which is the key for the tunability of threshold voltage. This finding has been explained with one empirical model of relative band shifting of semiconductor–QDs–tip interfaces with positive and negative substrate bias.

Graphical abstract: Single quantum dot rectifying diode with tunable threshold voltage

Supplementary files

Article information

Article type
Paper
Submitted
08 Jun 2017
Accepted
22 Aug 2017
First published
30 Aug 2017

J. Mater. Chem. C, 2017,5, 9792-9798

Single quantum dot rectifying diode with tunable threshold voltage

G. S. Kenath, P. Maity, Y. Kumar, H. Kumar, V. K. Gangwar, S. Chaterjee, S. Jit, A. K. Ghosh and B. N. Pal, J. Mater. Chem. C, 2017, 5, 9792 DOI: 10.1039/C7TC02537H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements