Issue 2, 2018

A potentiometric immunosensor for enterovirus 71 based on bis-MPA-COOH dendrimer-doped AgCl nanospheres with a silver ion-selective electrode

Abstract

Herein a new potentiometric immunoassay for the point-of-care detection of enterovirus 71 (EV71) was developed by using a silver (Ag+) ion-selective electrode (ISE). Initially, the carboxylated dendrimer-doped AgCl nanospheres were synthesized by the reverse micelle method. Then the synthesized nanospheres were used to label a polyclonal mouse anti-EV71 antibody via a typical carbodiimide coupling method. The immunoreaction was executed on a monoclonal anti-EV71 antibody-coated microplate by using biofunctional AgCl nanospheres as the detection antibody. With a sandwich-type immunoassay format, the carried AgCl nanospheres could be dissolved in the presence of NH3·H2O, and the released silver ions were determined with an external silver ion-selective electrode. Under optimal conditions, the shift in the potential increased with the increase in the EV71 concentration, in a wide linear range of 0.3–300 ng mL−1, with a detection limit of 0.058 ng mL−1. Intra- and inter-assay relative standard deviations with identical batches were less than 4.15% and 6.15%, respectively. By validating the spiked serum samples, our system shows consistency with the enzyme-linked immunosorbent assay (ELISA) kit.

Graphical abstract: A potentiometric immunosensor for enterovirus 71 based on bis-MPA-COOH dendrimer-doped AgCl nanospheres with a silver ion-selective electrode

Article information

Article type
Paper
Submitted
06 Aug 2017
Accepted
29 Nov 2017
First published
29 Nov 2017

Analyst, 2018,143, 487-492

A potentiometric immunosensor for enterovirus 71 based on bis-MPA-COOH dendrimer-doped AgCl nanospheres with a silver ion-selective electrode

A. Sun, Analyst, 2018, 143, 487 DOI: 10.1039/C7AN01305A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements