Issue 40, 2018

Aptamer-based detection of melamine in milk using an evanescent wave fiber sensor

Abstract

Rapid detection of melamine has been achieved in past studies to support the quality control of milk and formula products. Aptamer-based biosensors are a promising choice for melamine analysis due to their advantages over instrumental analysis and immunoassays. A long-chained aptamer with 88 nucleotides has been validated for its recognition of melamine. However, signal conversions of such aptamers have not been sufficiently explored for the purpose of their application in practice. Here, in order to extend the feasibility of detecting melamine using aptamers, we attempted to use an aptamer-based evanescent wave fiber (EWF) sensor to quantify melamine in milk. The duration of the analytical procedure was about 17 min. The calibration curve was interpreted by the dual-log function in the range from 0.1 to 20 μM. The limit of detection (LOD) of melamine was 0.15 μM in the buffer and 3.0 μM in milk. The selectivity of the method to melamine was verified using analogues such as cyanuric acid, ammelide, and ammeline. The recovery rates of melamine in liquid milk ranged from 92% to 108%, and the relative standard deviations were less than 7.5%. Thus, aptamer-based EWF sensing is a feasible method to detect melamine in milk.

Graphical abstract: Aptamer-based detection of melamine in milk using an evanescent wave fiber sensor

Supplementary files

Article information

Article type
Paper
Submitted
17 Jul 2018
Accepted
19 Aug 2018
First published
20 Aug 2018

Anal. Methods, 2018,10, 4871-4878

Aptamer-based detection of melamine in milk using an evanescent wave fiber sensor

Y. Qiu, Y. Tang, B. Li, C. Gu and M. He, Anal. Methods, 2018, 10, 4871 DOI: 10.1039/C8AY01594E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements